Portable Washer Crushers DWC-TM-100

Portable washer crushers

 

DWC-TM-100

Portable Trailers mounted Washer-Crusher

DWC-TM-100 Trailer mounted washer-crusher

This Trailer mounted equipment is capable of washing and or rinsing the interior of 55-gallon drum container.

Each unit can crush the drum inside the washer’s chamber after wash or rinse cycle is complete.

The system includes a 150 gallons lower chamber Tank. The tank is used to recirculate the wash fluids to be used to clean the next drums.

External tank of total 300 USG tank is included on the trailer. When selected the washer will draw from external tank to wash and return it to external tank.

Drum crushing side will reduce a 55 USG drum down to 2 inches flat.

The DWC-TM-100 standard main equipment come with.

  • 20 KW generator 460 VAC @ 3 Phase diesel.
  • Washer Crusher chamber (DWC-TM-100).
  • Trailer for unit, with hydraulic lift to dock height and lower drop to ground level down to 4-5 inches.
  • 300 USG external tank.

Standard Washer Crusher Features

  • Washer crusher chamber
  • Compaction force from 85,000 to 90,000 pounds 8-bore and 4-inch shaft rod.
  • Removable or replaceable piercing point on the crushing plate
  • Washes 55-gallon drums (steel and plastic)
  • Washes close top drums and open top drums (interior)
  • Can use water or water with detergent.
  • Internal 150 gallons reservoir
  • PLC controlled
  • Lower piercing cylinder.
  • Wash wand (rotary nozzle) drop down cylinder
  • IP-66 control cabinet. For outdoor use.
  • HMI touch screen for full operations included is wash cycle adjustable timer, circulation switch to external tank cycle, P&ID full viewing operations, maintenance screen. Other screens available based on options added.
  • Door closed safety switch. System will not operate with door open to ensure operators safety.
  • 20 HP power pack and pump with electrical solenoid valves

Standard Generator Feature on unit

  • 20 KW generator 460 VAC/3 Phase @ 60 HZ.
  • Battery box
  • Auto start button
  • Main disconnects.

Standard Tank Feature on unit.

  • 300 USG single wall tank (Polly tank) Water and detergent applications
  • 2-inch vent line on top.
  • 2-inch Discharge line on bottom.
  • 2-inch wash feed line.
  • 2-inch spare line on bottom.

Standard Electrical Cabinet on unit (None EXP Version)

  • IP-66 electrical cabinet stainless steel.
  • HIM color screen.
  • PLC and cards for processor.
  • Start/Stop Push button for operator.
  • Main Disconnect
  • Motor starters and Overloads
  • Resettable circuit breakers
  • Transformer 460 to 120 VAC
  • Ethernet switch (5-Port)

Tank Options

The DWC-TM-100 model includes an internal recirculation tank system with 150 gallons capacity in lower washer crusher and external tank 300-gallon capacity. You can increase the washing-crushing water life cycle by increasing the tank capacity (500 or 1000 gallon)

  • External recirculation tank 500-gal capacity. (Polly tank)
  • External recirculation tank 1000-gal capacity. (Polly tank)
  • External recirculation tank 500-gal capacity. (304 Stainless steel tank)
  • External recirculation tank 1000-gal capacity. (304 Stainless steel tank)

Optional System Features

  • Chamber for 85-gallon drum: Chamber enlarged for washing/crushing 85-gallon drum
  • Tank immersion heaters for to provide hot water (External stainless-steel tanks)
  • Tank immersion heaters for to provide hot water lower chamber washer/crusher.
  • Insulated washer crusher lower section and housing to retain heat if water is heated
  • Oil Skimmer System for the recirculation tank system
  • Y-Strainer to protect wash pump.
  • Trailer spare tire and holding rack.
  • Trailer battery trickle charger
  • 50 KW generator 460 VAC/3 Phase @ 60 HZ.
  • 20 KW Heater system.
  • Air compressor 5 HP with 60 USG tank.
  • Explosion proof upgrade for solvents.

 

Bookmark the permalink.