Drum washers DW-2

Drum washers DW-2

Open top drum washer for water applications only. The washer can do open top or closed top drums. This washer can be configured as a pneumatic unit or as an electrical unit. Each unit comes with rotating wash interior nozzle. The nozzle is set for 4.5 GPM at 40 PSI and can run up to 100 PSI at 7.8 GPM.

The interior drum washer is push button start and stop. The pneumatic unit can run at 60-80 PSI max wash pressure. The electrical unit runs at 100-120 high pressure.

The drum sits on a limit switch to ensure that there is a drum in place. If switch is not activated the washer will not activate. Each unit has adjustable timer to set washes from 1 min to 60 min. this is to allow customer more time if needed based on buildup of materials in the drum.

The electrical units have IP-66 electrical panel for wash down applications to keep panel sealed.

These washers are sold in 304 stainless steel or in 316 stainless steel. This works best with water applications and is easily cleaned up when oils or grease get over exterior of it.

Pneumatic unit part Number (DW2-PN) this has two air pumps to wash and drain the drum washer. The unit can wash plastic or steal drums. The washer can also wash out overpacks drums with a simple adjustment of raising the wash nozzle threaded pipe.

The electrical version has a multistage high-pressure pump. This increases the pressure and flow rate output to clean the interior of the interior of the drum.

Pneumatic