Conveyor Washer Crushers
Conveyor Washer Crushers
DWC-55 Washer-crusher with conveyors
This washer Crusher is for automated washing then crushing equipment of 55-gallon drum container.
Each unit can crush the drum inside the washer’s chamber after wash or rinse cycle is complete.
The system includes a 30 gallons lower chamber Tank. The tank is used to collect the wash fluids then return to customers external holding tank.
The washer will draw from external tank to wash and return it to external tank.
Drum crushing side will reduce a 55 USG drum down to 2 inches flat.
The DWC-55 standard main equipment come with.
• 230-380/415-440/460/575 VAC @ 3 Phase Offered.
• Washer Crusher chamber (DWC-55).
• Conveyorized staging for 4 Drums.
Standard Washer Crusher Features
• Washer crusher chamber
• Compaction force from 85,000 to 90,000 pounds 8-bore and 4-inch shaft rod.
• Removable or replaceable piercing point on the crushing plate
• Washes 55-gallon drums (steel and plastic)
• Washes close top drums and open top drums (interior)
• Can use water or water with detergent.
• Internal 30 gallons reservoir
• PLC controlled
• Lower piercing cylinder.
• Wash wand (rotary nozzle) drop down cylinder
• IP-66 control cabinet. For outdoor use.
• HMI touch screen for full operations included is wash cycle adjustable timer, circulation switch to external tank cycle, P&ID full viewing operations, maintenance screen. Other screens available based on options added.
• Door closed safety switch. System will not operate with door open to ensure operators safety.
• 20 HP power pack and pump with electrical solenoid valves
Standard Electrical Cabinet on unit (None EXP Version)
• IP-66 electrical cabinet stainless steel.
• HIM color screen.
• PLC and cards for processor.
• Start/Stop Push button for operator.
• Main Disconnect
• Motor starters and Overloads
• Resettable circuit breakers
• Transformer 460 to 120 VAC
• Ethernet switch (5-Port)
• Overloads and motor starters
The DWC-55 model includes an internal recirculation tank system with 30 gallons capacity in lower washer crusher. You can increase the washing-crushing water life cycle by increasing the tank capacity (500 or 1000 gallon)
• External recirculation tank 500-gal capacity. (Polly tank)
• External recirculation tank 1000-gal capacity. (Polly tank)
• External recirculation tank 500-gal capacity. (304 Stainless steel tank)
• External recirculation tank 1000-gal capacity. (304 Stainless steel tank)
Optional System Features
• Chamber for 85-gallon drum: Chamber enlarged for washing/crushing 85-gallon drum
• Tank immersion heaters for to provide hot water (External stainless-steel tanks)
• In line immersion heaters for to provide hot water for washer/crusher.
• Insulated washer crusher lower section and housing to retain heat if water is heated
• Oil Skimmer System for the recirculation tank system
• Y-Strainer to protect wash pump.
• 20 KW immersion Heater system.
• Explosion proof upgrade for solvents.